
Correspond to technical fabric Soltis 88 by Serge Ferrari
![]()
| Composition: | Polyester with PVC coating | |
| Production method: | Précontraint® | |
| Openess factor: | 8% | |
| Fire classification*: | EU: B-s2-d0, IT: Classe 1, F: M1, DE: B1 | |
| Weight: | 360 gr./mq ca. | |
| Thickness: | 0,45 mm ca. | |
| Roll's width: | 2670 mm | |
| Tensile strength: | warp: 140 DaN/5cm - weft: 145 DaN/5cm | |
| Tear strength: | warp: 14 DaN - weft: 14 DaN | |
| ZIP application: | Zip welded on the back side of the fabric, unless otherwise indicated. | |
| Seam processing: | Every 2670 mm | |
front
back| Code: | 2044 White |
| Roll's width: | 2670 mm |
front
back| Code: | 2171 Boulder |
| Roll's width: | 2670 mm |
front
back| Code: | 2175 Champagne (out of production from 01.01.2026) |
| Roll's width: | 2670 mm |
front
back| Code: | 50265 Hemp (out of production from 01.01.2026) |
| Roll's width: | 2670 mm |
front
back| Code: | 2047 Anthracite |
| Roll's width: | 2670 mm |
front
back| Code: | 2135 Sandy Beige |
| Roll's width: | 2670 mm |
front
back| Code: | 51180 Brick (out of production from 01.01.2026) |
| Roll's width: | 1770 mm |
front
back| Code: | 2043 Bronze |
| Roll's width: | 2670 mm |
front
back| Code: | 2167 Concrete (out of production from 01.01.2026) |
| Roll's width: | 2670 mm |
front
back| Code: | 51176 Deep Black |
| Roll's width: | 2670 mm |
The technical fabrics shown in this site are a selection of the available tissues for the realisation of the roller blinds. We recommend to contact us or to consult your retailer of trust for further explanations.
Because of technical limits for the display and the print the colours reproduced in this document can differ from the real colours. We recommend to control the colour chart with the tissue samples before making any order.
Values and indications given may change and are not binding.
* The fireproofing certifications are those reported by our fabric suppliers (as for all the other data regarding properties of fabrics): if necessary, it is always advisable, during the quotation phase, to make sure that the required certificate is present. These certificates can be subject to expiration and/or renewals.
